검색결과
-
[특집-기술위원회] TC 221 - 토목섬유(Geosynthetics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 1999년 TC 219, TC 220 등이 있다.ISO/TC 221 토목섬유(Geosynthetics)와 관련된 기술위원회는 2000년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 데이비드 하이드 1세(Mr David I Hyde)가 책임지고 있다. 현재 의장은 피터 애치슨(Mr Peter Atchison)이며 임기는 2026년 말까지다.ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 타이나 비셰비치(Ms Tajna Biscevic) 등이다.범위는 지오텍스타일, 지오멤브레인, 토목합성재료 점토 차수재 및 기타 토목합성 관련 제품을 포함한 모든 토목합성 제품의 표준화다.현재 ISO/TC 221 사무국의 직접적인 책임 하에 발행된 표준은 47개며 ISO/TC 221 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 30개국, 참관 회원은 16개국이다.□ ISO/TC 221 사무국의 직접적인 책임 하에 발행된 표준 47개 중 15개 목록▷ISO 9862:2023 Geosynthetics — Sampling and preparation of test specimens▷ISO 9863-1:2016 Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers▷ISO 9863-1:2016/Amd 1:2019 Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers — Amendment 1▷ISO 9864:2005 Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products▷ISO 10318-1:2015 Geosynthetics — Part 1: Terms and definitions▷ISO 10318-1:2015/Amd 1:2018 Geosynthetics — Part 1: Terms and definitions — Amendment 1▷ISO 10318-2:2015 Geosynthetics — Part 2: Symbols and pictograms▷ISO 10318-2:2015/Amd 1:2018 Geosynthetics — Part 2: Symbols and pictograms — Amendment 1▷ISO 10319:2015 Geosynthetics — Wide-width tensile test▷ISO 10320:2019 Geosynthetics — Identification on site▷ISO 10321:2008 Geosynthetics — Tensile test for joints/seams by wide-width strip method▷ISO 10722:2019 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method)▷ISO 10769:2011 Clay geosynthetic barriers — Determination of water absorption of bentonite▷ISO 10772:2012 Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions▷ISO 10773:2011 Clay geosynthetic barriers — Determination of permeability to gases□ ISO/TC 221 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/AWI 10318-1 Geosynthetics — Part 1: Terms and definitions▷ISO/AWI 10318-2 Geosynthetics — Part 2: Symbols and pictograms▷ISO/DIS 10319 Geosynthetics — Wide-width tensile test▷ISO/DIS 12236 Geosynthetics — Static puncture test (CBR test)▷ISO/DIS 12957-2 Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test▷ISO/FDIS 13426-2 Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites▷ISO/DIS 13428 Geosynthetics — Determination of the protection efficiency of a geosynthetic against impact damage▷ISO/FDIS 13431 Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour▷ISO/DIS 13433 Geosynthetics — Determination of dynamic perforation (cone drop test)▷ISO/CD TR 18228-5 Design using geosynthetics — Part 5: Stabilization▷ISO/DTR 18228-8 Design using geosynthetics — Part 8: Surface erosion control▷ISO/TR 18228-10 Design using geosynthetics — Part 10: Asphalt pavements
-
[특집-기술위원회] TC 219 - 바닥재(Floor coverings)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 등이 있다.ISO/TC 219 바닥재(Floor coverings)와 관련된 기술위원회는 1999년 결성됐다. 사무국은 벨기에 표준화기구(Bureau voor Normalisatie/Bureau de Normalisation, NBN)에서 맡고 있다.위원회는 카린 유핑거(Ms Karin Eufinger)가 책임지고 있다. 현재 의장은 제인 가드너(Ms Jane Gardner)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 타즈나 비세빅(Ms Tajna Biscevic) 등이다.범위는 섬유, 탄력성 있는 바닥재 및 합판(라미네이트) 바닥재 분야의 표준화다. 단, 목재, 세라믹, 테라조, 콘크리트, 이중바닥재(악세스 플로어, Raised Access Floor)는 제외한다.현재 ISO/TC 219 사무국의 직접적인 책임 하에 발행된 표준은 83개며 ISO/TC 219 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 29개국, 참관 회원은 17개국이다.□ ISO/TC 219 사무국의 직접적인 책임 하에 발행된 표준 83개 중 15개 목록▷ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area▷ISO 1765:1986 Machine-made textile floor coverings — Determination of thickness▷ISO 1766:1999 Textile floor coverings — Determination of thickness of pile above the substrate▷ISO 1957:2000 Machine-made textile floor coverings — Selection and cutting of specimens for physical tests▷ISO 2094:1999 Textile floor coverings — Determination of thickness loss under dynamic loading▷ISO 2424:2007 Textile floor coverings — Vocabulary▷ISO 2549:1972 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground▷ISO 2549:1972/Cor 1:1990 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground — Technical Corrigendum 1▷ISO 2550:1972 Textile floor coverings — Hand-made carpets — Determination of types of knots▷ISO 2551:2020 Textile floor coverings and textile floor coverings in tile form — Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane▷ISO 3018:1974 Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions▷ISO 3415:1986 Textile floor coverings — Determination of thickness loss after brief, moderate static loading▷ISO 3416:1986 Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading▷ISO 4760:2022 Laminate flooring — Topical moisture resistance — Assembled joint▷ISO 4918:2016 Resilient, textile and laminate floor coverings — Castor chair test□ ISO/TC 219 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/FDIS 2424 Textile floor coverings — Vocabulary▷ISO/AWI 4918 Resilient, textile, laminate and modular mechanical locked floor coverings — Castor chair test▷ISO/CD 10833 Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test▷ISO/CD 11378-2 Textile floor coverings — Laboratory soiling tests — Part 2: Drum test▷ISO/DIS 14486 Laminate floor coverings — Specification▷ISO/DIS 20251 Textile floor coverings — Water impermeability test▷ISO/CD 23106 Textile floor coverings — Production of changes in appearance by means of Vettermann drum tester▷ISO/CD 23122 Textile floor coverings — Production of changes in appearance by means of hexapod tumbler tester▷ISO/AWI 23999 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat▷ISO/FDIS 24342 Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles and planks
-
[특집-기술위원회] TC 212 - 의료 실험실 및 체외 진단 시스템(Medical laboratories and in vitro diagnostic systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 등이 있다.ISO/TC 212 의료 실험실 및 체외 진단 시스템(Medical laboratories and in vitro diagnostic systems)과 관련된 기술위원회는 TC 210, TC 211과 마찬가지로 1994년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는데이비드 스테리(Mr David Sterry)가 책임지고 있다. 현재 의장은 헤수스 루에다 로드리게스(Mr Jesus Rueda Rodriguez)이며 임기는 2027년말까지다. ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등이다.범위는 의료 실험실 및 체외 진단 시스템 분야의 표준화 및 지침이다. 여기에는 품질 관리, 분석 전후 절차, 분석 성능, 실험실 안전, 참조 시스템 및 품질 보증 등이 포함된다.단, ISO/TC 176에서 다루는 일반 품질 관리 표준, ISO/TC 210에서 다루는 의료기기 품질 관리 표준, ISO/TC 334 참조 자료 위원회(REMCO)에서 다루는 참조 자료 지침, ISO 적합성 평가 위원회(CASCO)에서 다루는 적합성 평가 지침 등은 제외된다현재 ISO/TC 212 사무국의 직접적인 책임 하에 발행된 표준은 47개며 ISO/TC 212 사무국의 직접적인 책임 하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 41개국, 참관 회원은 33개국이다.□ ISO/TC 212 사무국의 직접적인 책임 하에 발행된 표준 47개 중 15개 목록▷ISO 4307:2021 Molecular in vitro diagnostic examinations — Specifications for pre-examination processes for saliva — Isolated human DNA▷ISO/TS 5798:2022 In vitro diagnostic test systems — Requirements and recommendations for detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by nucleic acid amplification methods▷ISO 15189:2022 Medical laboratories — Requirements for quality and competence▷ISO 15190:2020 Medical laboratories — Requirements for safety▷ISO 15193:2009 In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures▷ISO 15194:2009 In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for certified reference materials and the content of supporting documentation▷ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures▷ISO 15197:2013 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus▷ISO 15198:2004 Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer▷ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems — Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases▷ISO/TS 16782:2016 Clinical laboratory testing — Criteria for acceptable lots of dehydrated Mueller-Hinton agar and broth for antimicrobial susceptibility testing▷ISO 17511:2020 In vitro diagnostic medical devices — Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples▷ISO/TS 17518:2015 Medical laboratories — Reagents for staining biological material — Guidance for users▷ISO 17593:2022 Clinical laboratory testing and in vitro medical devices — Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy▷ISO 17822:2020 In vitro diagnostic test systems — Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens — Laboratory quality practice guide□ ISO/TC 212 사무국의 직접적인 책임 하에 개발 중인 표준 23개 중 15개 목록▷ISO/DTS 5441 Competence requirements for biorisk management advisors▷ISO/DIS 5649 Medical laboratories — Concepts and specifications for the design, development, implementation, and use of laboratory-developed tests▷ISO/AWI TS 7446 ISO 35001 — Biorisk management for laboratories and other related organisations — Implementation guidance▷ISO/CD TS 7552-1 Specifications for pre-examination processes for circulating tumor cells (CTCs) in venous whole blood — Part 1: Isolated RNA▷ISO/CD TS 7552-2 Specifications for pre-examination processes for circulating tumor cells (CTCs) in venous whole blood — Part 2: Isolated DNA▷ISO/CD TS 7552-3 Specifications for pre-examination processes for circulating tumor cells (CTCs) in venous whole blood — Part 3: Preparations for analytical CTC staining▷ISO/AWI TS 8219 Sequencing and clinical application to infectious diseases▷ISO/DIS 15193 In vitro diagnostic medical devices — Requirements for reference measurement procedures▷ISO/DIS 15194 In vitro diagnostic medical devices — Requirements for certified reference materials and the content of supporting documentation▷ISO/CD TS 16766.2 Manufacturers’considerations for in vitro diagnostic medical devices in a public health crisis▷ISO/AWI TS 18701 Molecular in vitro diagnostic examinations — Specificationsfor pre-examination processes for human specimens — Isolated microbiome DNA▷ISO/AWI TS 18702 Molecular in vitro diagnostic examinations — Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood — DNA, RNA and proteins▷ISO/AWI 18703 Molecular in vitro diagnostic examinations — Specifications for pre-examination processes for venous whole blood — Isolated circulating cell free RNA from plasma▷ISO/CD 18704 Molecular in vitro diagnostic examinations — Specifications for pre-examination processes for urine and other body fluids — Isolated cell free DNA▷ISO/DIS 21474-3 In vitro diagnostic medical devices — Multiplex molecular testing for nucleic acids — Part 3: Interpretation and reports
-
[특집-기술위원회] TC 211 - 지리정보/지리학(Geographic information/Geomatics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 등이 있다.ISO/TC 211지리정보/지리학(Geographic information/Geomatics)과 관련된 기술위원회는 TC 210과 마찬가지로 1994년 결성됐다. 사무국은 스웨덴 국립표준청(Svenska institutet för standarder, SIS)에서 맡고 있다.위원회는 마츠 올린(Mr Mats Åhlin)가 책임지고 있다. 현재 의장은 피터 파슬로(Mr Peter Parslow)이며 임기는 2024년말까지다. ISO 기술 프로그램 관리자는 하킴 음킨시(Mr Hakim Mkinsi), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등이다.범위는 디지털 지리정보 분야의 표준화다. 지구와 관련된 위치와 직간접적으로 연관된 물체나 현상에 관한 정보에 대한 구조화된 표준 세트 확립을 목표로 하고 있다.지리 정보의 범위 내에서 이러한 표준은 데이터 관리를 위한 방법, 도구 및 서비스를 지정할 수 있다. 데이터 관리는 사용자 및 시스템을 위한 데이터 획득, 처리, 분석, 접근, 제시 및 출판이 포함된다.이 작업은 가능한 경우 정보 기술 및 데이터에 대한 적절한 표준과 연결되어야 하며 지리 데이터를 사용하는 부문별 응용 프로그램 개발을 위한 프레임워크를 제공해야 된다.현재 ISO/TC 211 사무국의 직접적인 책임 하에 발행된 표준은 97개며 ISO/TC 211 사무국의 직접적인 책임 하에 개발 중인 표준은 26개다. 참여하고 있는 회원은 38개국, 참관 회원은 35개국이다.□ ISO/TC 211 사무국의 직접적인 책임 하에 발행된 표준 97개 중 15개 목록▷ISO 6709:2022 Standard representation of geographic point location by coordinates▷ISO 19101-1:2014 Geographic information — Reference model — Part 1: Fundamentals▷ISO 19101-2:2018 Geographic information — Reference model — Part 2: Imagery▷ISO 19103:2015 Geographic information — Conceptual schema language▷ISO 19104:2016 Geographic information — Terminology▷ISO 19105:2022 Geographic information — Conformance and testing▷ISO 19106:2004 Geographic information — Profiles▷ISO 19107:2019 Geographic information — Spatial schema▷ISO 19108:2002 Geographic information — Temporal schema▷ISO 19108:2002/Cor 1:2006 Geographic information — Temporal schema — Technical Corrigendum 1▷ISO 19109:2015 Geographic information — Rules for application schema▷ISO 19110:2016 Geographic information — Methodology for feature cataloguing▷ISO 19111:2019 Geographic information — Referencing by coordinates▷ISO 19111:2019/Amd 1:2021 Geographic information — Referencing by coordinates — Amendment 1▷ISO 19111:2019/Amd 2:2023 Geographic information — Referencing by coordinates — Amendment 2□ ISO/TC 211 사무국의 직접적인 책임 하에 개발 중인 표준 26개 중 15개 목록▷ISO/DIS 19103 Geographic information — Conceptual schema language▷ISO/CD 19109 Geographic information — General feature model and rules for application schema▷ISO/AWI TR 19115-4 Geographic information – Metadata — Part 4: JSON schema implementation of metadata fundamentals▷ISO/DIS 19116 Geographic information — Positioning services▷ISO/AWI TR 19121 Geographic information — Imagery and gridded data▷ISO/AWI 19123-2 Geographic information — Schema for coverage geometry and functions — Part 2: Coverage implementation schema▷ISO/AWI TS 19123-4 Geographic information — Schema for coverage geometry and functions — Part 4: Tiling Schema▷ISO/AWI TS 19124-2 Geographic information — Calibration and validation of remote sensing data and derived products — Part 2: SAR▷ISO/AWI 19127 Geographic information — Geodetic register▷ISO/AWI TS 19130-2 Geographic information — Imagery sensor models for geopositioning — Part 2: SAR, InSAR, lidar and sonar▷ISO/CD 19135 Geographic information registration — Requirements▷ISO/DTS 19144-3 Geographic information — Classification systems — Part 3: Land Use Meta Language (LUML)▷ISO/DIS 19152-2 Geographic information — Land Administration Domain Model (LADM) — Part 2: Land registration▷ISO/FDIS 19152-3 Geographic information — Land Administration Domain Model (LADM) — Part 3: Marine georegulation▷ISO/DIS 19152-4 Geographic information — Land Administration Domain Model (LADM) — Part 4: Valuation information
-
[특집-기술위원회] TC 188 - 소형선박(Small craft)… 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186등이 있다.ISO/TC 188 소형선박(Small craft)과 관련된 기술위원회는 1984년 결성됐다. 사무국은 스웨덴 국립표준청(Svenska institutet för standarder, SIS)에서 맡고 있다.위원회는 아네트 에릭슨(Ms Anette Eriksson)이 책임지고 있다. 현재 의장은 크레이그 숄튼(Mr Craig Scholten)이며 임기는 2026년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández) ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박의 장비 및 구조 세부 사항의 표준화다. 단, ISO/TC 8이 다루고 있는 구명정 및 구명 장비는 제외한다.현재 ISO/TC 188 사무국과 관련해 발행된 표준은 96개며 ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준은 82개다.ISO/TC 188 사무국과 관련해 개발 중인 표준은 16개며 ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 22개국, 참관 회원은 23개국이다.□ ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준 82개 중 15개 목록▷ISO 4566:1992 Small craft with inboard engine — Propeller shaft ends and bosses with 1:10 taper▷ISO 6017:2024 Small craft — Automatic watertight ventilation shutdown system▷ISO 6185-1:2001 Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW▷ISO 6185-2:2001 Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive▷ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater▷ISO 6185-4:2011 Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater▷ISO 7840:2021 Small craft — Fire-resistant fuel hoses▷ISO 8099-1:2018 Small craft — Waste systems — Part 1: Waste water retention▷ISO 8099-2:2020 Small craft — Waste systems — Part 2: Sewage treatment systems▷ISO 8469:2021 Small craft — Non-fire-resistant fuel hoses▷ISO 8665:2006 Small craft — Marine propulsion reciprocating internal combustion engines — Power measurements and declarations▷ISO 8666:2020 Small craft — Principal data▷ISO 8845:1994 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper▷ISO 8845:1994/Cor 1:1995 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper — Technical Corrigendum 1▷ISO 8846:1990 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases□ ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/FDIS 6185-3 Inflatable boats — Part 3: Boats with a length of the hull less than 8 m with a motor power rating of 15 kW and greater▷ISO/FDIS 8665-2 Small craft — Power measurements and declarations — Part 2: Electric marine propulsion▷ISO/DIS 8846 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases▷ISO/DIS 10239.2 Small craft — Liquefied petroleum gas (LPG) systems▷ISO 11812:2020/DAmd 1 Small craft — Watertight or quick-draining recesses and cockpits — Amendment 1▷ISO/CD 12215-9 Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages▷ISO/AWI 12217-1 Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-2 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-3 Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m▷ISO/FDIS 15085 Small craft — Protection from falling overboard and means of reboarding▷ISO/DIS 16315 Small craft — Electrical systems used for electrical propulsion▷ISO/CD 23625 Small craft — Lithium-ion batteries□ ISO/TC 188 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 188/SC 1 Personal safety equipment ; 발행된 표준 14개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 181 - 장난감 안전(Safety of toys)… 기계적, 물리적, 화학적 및 가연성 특성과 관련된 안전성 측면에서 장난감의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 등이 있다.ISO/TC 181 장난감의 안전(Safety of toys)과 관련된 기술위원회는 TC 180과 마찬가지로 1980년 결성됐다. 사무국은 덴마크 표준재단(Danish Standards Foundation, DS)에서 맡고 있다.위원회는 피터 담가드(Mr Peter Damgaard)가 책임지고 있으며 현재 의장은 피터 트릴링스가드(Mr Peter Trillingsgaard)이며 임기는 2024년까지다. ISO 기술 프로그램 관리자는 패트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다.범위는 기계적, 물리적, 화학적 및 가연성 특성과 관련된 안전성 측면에서 장난감의 표준화다. 단, IEC에서 다루는 모든 전기적 측면은 제외한다.현재 ISO/TC 181 사무국의 직접적인 책임 하에 발행된 표준은 16개며 ISO/TC 181 사무국의 직접적인 책임 하에 개발 중인 표준은 5개다. 참여하고 있는 회원은 27개국, 참관 회원은 37개국이다.□ ISO/TC 181 사무국의 직접적인 책임 하에 발행된 표준 16개 목록▷ISO 8124-1:2022 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties▷ISO 8124-2:2023 Safety of toys — Part 2: Flammability▷ISO 8124-3:2020 Safety of toys — Part 3: Migration of certain elements▷ISO 8124-3:2020/Amd 1:2023 Safety of toys — Part 3: Migration of certain elements — Amendment 1: Limits for boron and other elements in slime, and barium in modelling clay▷ISO 8124-4:2014 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use▷ISO 8124-4:2014/Amd 1:2017 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 1▷ISO 8124-4:2014/Amd 2:2019 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 2▷ISO 8124-5:2015 Safety of toys — Part 5: Determination of total concentration of certain elements in toys▷ISO 8124-6:2023 Safety of toys — Part 6: Certain phthalate esters▷ISO 8124-7:2015 Safety of toys — Part 7: Requirements and test methods for finger paints▷ISO 8124-7:2015/Amd 1:2020 Safety of toys — Part 7: Requirements and test methods for finger paints — Amendment 1▷ISO/TR 8124-8:2016 Safety of toys — Part 8: Age determination guidelines▷ISO/TR 8124-9:2020 Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1 and ASTM F963▷ISO 8124-10:2023 Safety of toys — Part 10: Experimental sets for chemistry and related activities▷ISO 8124-11:2019 Safety of toys — Part 11: Chemical toys (sets) other than experimental sets▷ISO 8124-12:2023 Safety of toys — Part 12: Microbiological safety□ ISO/TC 181 사무국의 직접적인 책임 하에 개발 중인 표준 5개 목록▷ISO 8124-1:2022/CD Amd 1 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1▷ISO/DIS 8124-4 Safety of toys — Part 4: Activity toys for domestic use▷ISO/AWI 8124-5 Safety of toys — Part 5: Determination of total concentration of certain elements in toys▷ISO/CD TR 8124-8 Safety of toys — Part 8: Age determination guidelines: first age grade for the appropriate play of toys▷ISO/CD TR 8124-9 Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1 and ASTM F963
-
[특집-기술위원회] TC 174 - 보석 및 귀금속(Jewellery and precious metals)… 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 등도 포함된다.ISO/TC 174 보석 및 귀금속(Jewellery and precious metals)과 관련된 기술위원회는 TC 171, TC 172, TC 173과 마찬가지로 1978년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 페트라 비쇼프((FH) Petra Bischoff)가 책임지고 있으며 현재 의장은 조나단 조드리(Mr Jonathan Jodry)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리 분야와 분석, 샘플링, 불순물 등 귀금속 분야 표준화다.현재 ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준은 21개며 ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 19개국, 참관 회원은 25개국이다.□ ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준 21개 중 15개 목록▷ISO 5724:2023 Jewellery and precious metals — Determination of very high purity gold — Difference method using ICP-MS▷ISO 8653:2016 Jewellery — Ring-sizes — Definition, measurement and designation▷ISO 8654:2018 Jewellery — Colours of gold alloys — Definition, range of colours and designation▷ISO 8654:2018/Amd 1:2019 Jewellery — Colours of gold alloys — Definition, range of colours and designation — Amendment 1▷ISO 9202:2019 Jewellery and precious metals — Fineness of precious metal alloys▷ISO 10713:1992 Jewellery — Gold alloy coatings▷ISO 11210:2023 Jewellery and precious metals — Determination of platinum — Gravimetry using ammonium chloride▷ISO 11426:2021 Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)▷ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide▷ISO 11490:2023 Jewellery and precious metals — Determination of palladium — Gravimetry using dimethylglyoxime▷ISO 11494:2019 Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element▷ISO 11495:2019 Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element▷ISO 11596:2021 Jewellery and precious metals — Sampling of precious metals and precious metal alloys▷ISO 13756:2015 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride▷ISO 15093:2020 Jewellery and precious metals — Determination of high purity gold, platinum and palladium — Difference method using ICP-OES□ ISO/TC 174 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/PRF 6893 Jewellery and precious metals — Inspection of batches of small diamonds — Terminology, classification and test methods▷ISO/DIS 10713 Jewellery and precious metals — Gold alloy coatings▷ISO/PRF 11427 Jewellery and precious metals — Determination of silver — Potentiometry using potassium bromide▷ISO/PRF 13756 Jewellery and precious metals — Determination of silver — Potentiometry using sodium chloride or potassium chloride▷ISO/DIS 18214 Jewellery and precious metals — Determination of high purity gold, silver, platinum and palladium — Difference method using SPARK-OES▷ISO/AWI 19376-1 Jewellery and precious metals — Vocabulary — Part 1: Precious metals and units▷ISO/CD 19919 Jewellery and precious metals — Determination of silver — ICP-OES method using an internal standard element▷ISO/AWI 21261-1 Jewellery and precious metals — Responsible precious metals — Part 1: General requirements for responsible precious metals▷ISO/AWI 21261-2 Jewellery and precious metals — Responsible precious metals — Part 2: Minimum rules and procedures for conformity assessment schemes▷ISO/AWI 21261-3 Jewellery and precious metals — Responsible precious metals — Part 3: Requirements for recycled gold
-
[특집-기술위원회] TC 170 - 수술도구(Surgical instruments)… 겸자·가위·메스·리액터(견인기)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 등도 포함된다.ISO/TC 170 수술도구(Surgical instruments)와 관련된 기술위원회는 TC 167, TC 168과 마찬가지로 1977년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 페트라 비쇼프(Mrs Dipl.-Ing. (FH) Petra Bischoff)가 책임지고 있으며 현재 의장은 토드 포프(Mr Todd Pope)다. ISO 기술 프로그램 관리자는 페트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone) 등으로 조사됐다.범위는 겸자, 가위, 메스, 리액터(견인기)와 같은 수술 도구 분야의 표준화다. 단, ISO / TC 106 - 치과(Dentistry), ISO / TC 150 - 수술용임플란트(Implants for surgery)에서 다루고 있는 특수 도구는 제외한다.현재 ISO/TC 170 사무국의 직접적인 책임 하에 발행된 표준은 5개며 ISO/TC 170 사무국의 직접적인 책임 하에 개발 중인 표준은 7개다. 참여하고 있는 회원은 9개국, 참관 회원은 24개국이다.□ ISO/TC 170 사무국의 직접적인 책임 하에 발행된 표준 5개 목록▷ISO 7151:1988 Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods▷ISO 7153-1:2016 Surgical instruments — Materials — Part 1: Metals▷ISO 7740:1985 Instruments for surgery — Scalpels with detachable blades — Fitting dimensions▷ISO 7741:1986 Instruments for surgery — Scissors and shears — General requirements and test methods▷ISO 13402:1995 Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure□ ISO/TC 170 사무국의 직접적인 책임 하에 개발 중인 표준 7개 목록▷ISO/CD 6335-1 Surgical instruments — Staplers — Part 1: Vocabulary▷ISO/CD 6335-2 Surgical instruments — Staplers — Part 2: General requirements▷ISO/FDIS 7151 Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods▷ISO/CD 7554-1 Surgical instruments — Terms, measuring methods and tests — Part 1: Vocabulary▷ISO/CD 7554-2 Surgical instruments — Terms, measuring methods and tests — Part 2: Measuring methods for the determination of basic measures of surgical standard instruments▷ISO/CD 7554-3 Surgical instruments -Terms, measuring methods and tests — Part 3: Test methods▷ISO/DIS 13402 Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure
-
식품용 폐페트병 재활용한 물리적 재생원료 생산 확대식품의약품안전처는 올해 식품용 투명 폐페트병(PET)을 재활용해 물리적으로 재생한 원료를 식품용기의 제조에 사용할 수 있도록인정한 이후 현재까지 식품용 페트병 생산을 위한 물리적 재생원료 총 3,400여톤이 생산됐으며 향후생산량이 더욱 증가할 것으로 기대한다고 27일 밝혔다. PET(polyethylene terephthalate)는 폴리에틸렌 테레프탈레이트의 약자로 테레프탈산(또는 테레프탈산메틸에스테르)과 에틸렌글리콜을 중합해 만든 플라스틱의 한 종류이며 탄산음료, 생수 등의 식품을 담는 용도로 사용된다. 물리적 재생원료는 사용된 합성수지 제품을 분리수거·선별하여 분쇄·세척 후 불순물을 제거하여 화학적 변화 없이 재생한 원료를 말한다. 생산된 3,400여톤의 재생 원료는작년 식품용 페트 전체 생산량(재활용하지않은 신규원료)의 약 1% 수준으로, 5개 식품제조업체가 식품용 페트병 원료로 사용했다. 현재 재생 원료로 페트병 생산을 준비하고 있는 식품제조업체 등에서 시험생산을 진행하고 있어 내년에는 물리적 재생 원료의 생산량과 이를 사용한 제품 생산이 더욱 확대될 것으로 기대된다. 식약처는 그간 폐페트병 등 플라스틱을 재생해 식품용기의 제조에 사용하고자 하는 경우 화학적 방법으로 재생한 경우에만 사용을 허용하고 있었으나, 국제적 추세인 탄소중립의 실현을 위해 재활용을 확대하고자 환경부와 협력해 물리적 방법으로 재생한 원료까지 식품용기의 원료로 사용할 수 있도록 허용했다. 먼저 페트 수거‧선별에서부터 최종제품 생산까지 재생원료의 품질‧안전성을 확보하기 위해 단계별 안전관리 기준을 마련했다. 이후 작년 8월 한 국내 기업이 재생원료 사용을 최초로 신청했으며, 식품 용기 원료로서의안전성 등을 엄격히 심사하여 물리적 재생 원료로 인정했다. 이에 따라 국내에서도 식품용 재생용기 출시가 가능해졌다. 또한 올해 5월 환경부, 식품제조업체, 식품용기 재생업체 등과 ‘투명페트병순환체계 구축을 위한 업무협약’을 체결해 물리적 재생원료의 생산과 사용을 확대하기 위한 노력을 지속하고 있다. 참고로 현재 미국, 유럽연합 등 제외국의 경우 식품용기 제조 시 재생원료사용을 확대하는 정책이 이미 시행되고 있고 우리나라도 2030년까지 재생원료(PET) 사용 비중을 30%로 확대하는 것을 목표로 하고 있다. 페트병의 재활용이 보다 활성화되면 자원순환을 촉진해 순환경제를 구축하는데 도움을 주고, 새로운 플라스틱 사용을 절감해 환경을 보호하는데 기여할 것으로 기대된다. 식약처 관계자는 “앞으로도 재생 원료로 제조된 식품용기의 안전성을 확보하기 위해 물리적 재생원료의 인정 심사를 보다 철저히 실시하겠다”며 “자원순환 촉진과환경 보호를 위해 물리적 재생원료의 대상 재질을 지속적으로 확대해 나갈 계획”이라고 밝혔다.
-
[특집-기술위원회] TC 153 - 밸브(Valves)… 현재까지 28개 표준 발행스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136, △1970년 TC 137, TC 138, TC 142, TC 145 등도 포함된다.ISO/TC 153 밸브(Valves)와 관련된 기술위원회는 TC 146, TC 147, TC 148, TC 149, TC 150과 마찬가지로 1971년 결성됐다. 사무국은 프랑스 표준화기구(Association Française de Normalization, AFNOR)에서 맡고 있다.위원회는 헬렌 크로스(Mme Hélène Cros)가 책임지고 있다. 현재 의장은 파스칼 빈지오(M Pascal Vinzio)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 파비올라 카라골 리베라(Ms Fabiola Caragol Rivera) 등으로 조사됐다.범위는 산업용 밸브, 어태치먼트 포함한 밸브 액츄에이터, 스팀 트랩 분야의 표준화다. 호환성을 다루는 매개변수, 액추에이터 장착을 위한 밸브 결합 세부 사항, 테스트, 마킹, 품질 요구 사항, 용어 및 기타 관련 매개 변수를 포함하고 있다. 단, 아래 사항은 153 표준화에서 제외된다.△ISO / TC 185의 책임인 안전 및 릴리프 밸브 및 기타 압력 릴리프 장치△ISO/TC 67의 책임인 석유 및 천연가스 산업용 크로스 컨트리 파이프라인용 웰헤드 장비용 생산 밸브 및 밸브△IEC / TC 65의 책임을 맡은 산업 공정 제어 시스템에 사용되는 최종 제어 요소를 형성하는 밸브△ISO / TC 138의 책임을 맡은 주로 플라스틱으로 만들어진 외피를 가진 밸브△위생용 밸브△솔레노이드현재 ISO/TC 153 사무국의 직접적인 책임 하에 발행된 표준은 28개며 SO/TC 150 사무국의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 20개국, 참관 회원은 25개국이다.□ ISO/TC 153 사무국의 직접적인 책임 하에 발행된 표준 28개 중 15개 목록▷ISO 5115:2023 Industrial valves — Part-turn valve actuation▷ISO 5117:2023 Automatic steam traps — Production and performance characteristic tests▷ISO 5208:2015 Industrial valves — Pressure testing of metallic valves▷ISO 5209:2019 General purpose industrial valves — Marking▷ISO 5210:2023 Industrial valves — Multi-turn valve actuator attachments▷ISO 5211:2023 Industrial valves — Part-turn actuator attachments▷ISO 5752:2021 Metal valves for use in flanged pipe systems — Face-to-face and centre-to-face dimensions▷ISO 6002:2021 Industrial valves — Bolted bonnet steel gate valves▷ISO 6552:1980 Automatic steam traps — Definition of technical terms▷ISO 6552:1980/Cor 1:2009 Automatic steam traps — Definition of technical terms — Technical Corrigendum 1▷ISO 6553:2016 Automatic steam traps — Marking▷ISO 6554:1980 Flanged automatic steam traps — Face-to-face dimensions▷ISO 6704:1982 Automatic steam traps — Classification▷ISO 7121:2016 Steel ball valves for general-purpose industrial applications▷ISO 10434:2020 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries □ ISO/TC 153 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록 ▷ISO 5640 Industrial valves — Mounting kits for part-turn valve actuator attachment ▷ISO/CD 12101 Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Classification system and qualification procedures for type testing of stem seals for valves